READ MORE
Surface Preparation :
- All new plaster should be allowed to dry for at least 3 to 5 months depending on the season.
- The surface should be completely free from previous coats of colour wash, lime, distemper, dirt, dust, oil and grease.
- Smoothen the surface by filling dents with thin coat of KamoGuard Acrylic Wall Smoothner and allow drying for 5 to 8 hrs.
- Sand the surface with emery paper 180 and apply one coat of Kamoprime Water based Cement Primer .
Direction For Use :
- Apply 2-3 coats of Kamosilky Acrylic Washable Distemper by thinning down with 1.5 – 2 parts of Distemper with one part of Water.
- Second coat should be followed after 3 hrs of air drying of 1st. coat, Under normal temperature & humidity.
- Universal Tinter can be used to get the desired shades.
Safety, Health & Environmental Information :
- Eco Friendly: Contains no added Lead, Mercury, Cadmium & Chromium compounds.
- Store the product at ambient conditions in a well ventilated location and away from the source of fire and ignition. Avoid eye & skin contact.
- Keep out of reach of children and away from food, drink and animal feed. Do not pour left over paint down the drains or in water courses.
- Avoid inhalation and wear eye protection during application.
- Remove splashes from skin with soap and water.
Kamosilky Acrylic Washable Distemper
Kamosilky Acrylic Washable Distemper has an exquisite collection of pastel & vibrant shades. It is based on Acrylic Emulsion to give a smooth aesthetic finish for interiors with slight sheen and a finish of silk.
READ MORE
Direction For Use :
- All new plaster should be allowed to dry for at least 3 to 5 month its depends on season.
- The surface should be completely free from pervious coats of colour wash, powder Distemper & also to be free from dirt, dust, oil and grease.
- Smoothen the surface by filling dents with thin coat of KamoGuard Acrylic Wall Smoothner and allow drying for 5 to 8 hrs.
- Sand the surface with emery paper 180 and apply one coat of Kamoprime Cement Primer Water Base.
Direction for Application :
- Apply 2-3 coat of Bunty Acrylic Distemper by thinning down with 1.5-2 part of Distemper with one part of water. Second coat should be followed after 3 hrs of air drying of 1st coat under normal temperature & humidity. Universal tinter can be used to get desire shades.
Safety, Health & Environmental Information :
- Eco Friendly: – Contains no added leads, mercury cadmium & chromium compounds.
- Store the product at ambient conditions in well ventilated location and away from the source of fire and ignition. Avoid eye & skin contact.
- Do not pour left over Paint down drains or in water courses.
- Avoid inhalation and wear eye protection during application.
Bunty Acrylic Distemper
Bunty Acrylic Distemper is a specially formulated water thinnable wall paint based on emulsion to give smooth finish. Available in wide rang of colour.
Chota Bunty Pouch Distemper
Chota Bunty Pouch Distemper is a water based wall finish for interiors, which gives a smooth & beautifal look that lasts all year round.